Remove Maf Sensor
Remove Maf Sensor. Pour isopropyl alcohol in a clean spray bottle. The maf sensor delete, also called maf removal or maf off is usually required on highly upgraded vehicles.
Just take off and disconnect the maf and use the spray to clean it. After cleaning the maf sensor, allow it to dry completely for a few minutes. Click to see full answer.
You'll See That The Side That's In The Airpath/Flow Will Be Matt Black With A Kind Of Soot And The Other Side Will Be Nice And Shiny.
Using a special maf sensor cleaner (which you can purchase from any automotive store), spray the interior and exterior of the housing, as well as the connectors outside. Remove the maf sensor from the vehicle. Locating and cleaning the maf sensor.
Undo The Two Screws That Hold The Unit (Mines A Denso) In Place Just After The Airbox.
The sensor itself is very easy to locate. It’s important to protect the hot wires and the plate. Locate the mass air flow sensor on your vehicle, which will be under the hood.
If There’s Dirt Or Debris In The Ducts,.
Spray a few times, let it dry, repeat, especially if you have an oiled air filter. Pour isopropyl alcohol in a clean spray bottle. Spray the alcohol liberally over the maf sensor.
When You Have Found It, Remove The Section Of Plastic That Contains The Sensor Itself.
Place the wet maf sensor on a clean shop rag or paper towel. 5 quick steps to clean mass air flow sensor. Cleaning a dirty maf sensor
After Cleaning The Maf Sensor, Allow It To Dry Completely For A Few Minutes.
There are a couple of screws that you remove. Open the bonnet and locate the turbo and the air filter. Gently ease the unit out.
Post a Comment for "Remove Maf Sensor"