Skip to content Skip to sidebar Skip to footer

Dexis Sensor Not Working

Dexis Sensor Not Working. Image 2 shows the sensor is not being recognized properly and further Even if they do bite it, the sensor will not be damaged, and the images stay clear and detailed.

Dexis Platinum Posterior Holder XRay Products Supplies
Dexis Platinum Posterior Holder XRay Products Supplies from www.mwdental.com

Click on the setting button ( ). Dexis will display an error (the following configuration errors were detected). Get a protection plan for your sensor.

If Your Sensor’s Number Is Not Shown, Refer To The Installation Instructions Booklet For Sensor Disk Instructions.


If your dental office uses dexis sensors or software, we can help! Reboot your computer to complete the software installation for your new dexis titanium sensor. Handle the sensor with care and try not to drop the sensor;

Go Ahead And Install Dexis On A Fresh Desktop Or Laptop And Test The Sensors With That Computer.


You don’t know what the future holds. The dexis carivu camera is not currently supported. Even if they do bite it, the sensor will not be damaged, and the images stay clear and detailed.

Image 2 Shows The Sensor Is Not Being Recognized Properly And Further


The new dexis titanium sensor captures consistent, phenomenal images with improved tissue contrast across a broader spectrum of radiation levels especially at low doses. Through many years of experience, our technicians have received the proper training and certifications to perform their jobs. Sometimes, these are located on the front or back of the computer.

Dexis 9 And Dexis Imaging Suite “Dexis 10”).


Poor care of the dexis sensor or dexis capture device can result in damage to or destruction of the fragile electronic components. The dexis integrator is supported by dexis directly, not the patterson technology center. Printed copies of this document are considered uncontrolled.

Image Appears With A Honeycomb Pattern Note:


Verify that your imaging software. To verify that the sensor drivers and calibration files where installed correctly, launch dexis imaging suite If the sensor is new or has not worked on this machine before make sure that the correction files are installed in the.

Post a Comment for "Dexis Sensor Not Working"