Aem Map Sensor Install
Aem Map Sensor Install. This is going to document the where, how, and why for each one. Fri sep 28, 2007 6:40 am.
Aem holds no responsibility for any engine damage that results from the misuse of this product! Don't forget to enable the o2 or the spare av input and also calibrate the o2 sensor. Which aem ecu do you have?
The Aem Map Sensors Have Threaded Ends On Them And Can Be Installed Directly Into The Intake Manifold After It Has Been Drilled/Tapped To Accept The Sensor.
Connect it to either the o2 or a spare av input. The sensor price is about $55. 1 of 2 go to page.
Which Aem Ecu Do You Have?
Is there some sort of formula for this or what am i missing? The aem map sensors have threaded ends on them and can be installed directly into the intake manifold after it has been drilled/tapped to accept the sensor. It is very easy to install.
Use A Brass Pressure Sensor Where You Need A Good Reference To What Pressure Is Being Seen.
Much more accurate, and worth the extra $50 or so. Aem offers high quality stainless steel psig sensors in 100, 150, 500, 1,000, and 2,000. Adding to the flexibility of the system is the ability to tap into oem and aftermarket sensors.
Aem Wideband Uego Install In To Haltech.
Discussion starter · #1 · oct 14, 2009. I decided to use aem v2 on my car because i was already familiar with it. This is going to document the where, how, and why for each one.
While Cheap And Fairly Consistent, It Is Difficult To Set Up To Accurately Read Correct Boost Pressure.
A map sensor has 3 wires (ground, +5v source, and signal).diy: Best place to install aem map sensor? Post by crispeed » tue mar 02, 2010 4:13 am.
Post a Comment for "Aem Map Sensor Install"