Faulty Temperature Sensor Motherboard
Faulty Temperature Sensor Motherboard. I think the sensor is faulty as there is no real reason that it. See if the cpu reports normally.
And to my fright, it was true. If the motherboard is faulty then would suggest to rma it because you cant tell if anything is overheating but in bios cpu temps go higher and if it still showing the same temperature then would see if the cpu cooler is working and fitted on correctly but if anything is faulty then do not ignore them. Have tried updating the bios to 1103, but no change.
I Think That A Motherboard Temperature Sensor Might Be Faulty, It Causes The Pc To Restart A Randomly Very Often, Is There A Way I Can Disable It Or Maybe Set The Limit Higher?
A faulty temperature sensor will automatically make the fan default to maximum speed as a precautionary measure. Of course, your gpu will always have its own temperature sensing system. Maybe the temp sensor is broken.
Am Thinking Maybe The Motherboard If Faulty?
If you have the right thermistors your temperature display should now show the correct temperature. Turn off the pc, switch off the power supply (or unplug the cord), remove the 3v battery on the board, press the power button for a few seconds, put everything back and power on. A frequent problem on the a5 that people seem to be encountering is faulty temperature readings.
Tried Reloading The Defaults For The Mobo, No Change.
And if you are seeing some unusually high temperatures, such as ones above 100°c, then it could be a faulty temperature sensor. Faulty motherboard temperature sensor potential causing my pc to restart. If the motherboard is faulty then would suggest to rma it because you cant tell if anything is overheating but in bios cpu temps go higher and if it still showing the same temperature then would see if the cpu cooler is working and fitted on correctly but if anything is faulty then do not ignore them.
Again, Not All Motherboards Will Come With These Sensors.
Of course i got scared, not a single part on the motherboard, at least in my mind should be overheating that much at almost no load. Have tried updating the bios to 1103, but no change. If your motherboard didn't wire a thermistor to the pins dedicated to one of the temperature sensors, then you'll get invalid readings.
This Can Be Caused By Several Things:
If the temperature shown is way off it might either be because your display is set to the wrong temperature scale (fahrenheit or celsius) or that you have got the wrong thermistors. Here's a good writeup on how to decode apple hardware test error codes: You also indicate that the internal temperature is 198° which is very high.
Post a Comment for "Faulty Temperature Sensor Motherboard"