Sloan Flushmate Sensor Adjustment
Sloan Flushmate Sensor Adjustment. Maybe i'll just have to replace it. As far as i know, the flushmate is not adjustable.
The concealed flushometer everyone will get behind. Middle wall 6 toilets, 3 urinals. The actuator needs to be set at the proper clearance, 1/8” from either the flush rod or push button.
Fully Turn On The Water Supply Valve.
Middle wall 6 toilets, 3 urinals. Troubleshooting flushmate system problems to solve common problems and save work costs for other home problems. Should the sensor need adjusting:
2 Ready To Ship Today.
One time we had a sensor problem on sloan. Sloan flushmate® valve troubleshooting overview. The actuator needs to be set at the proper clearance, 1/8” from either the flush rod or push button.
1) Remove The Cover Using Cover Key (E), (Im Age 18).
They will only fit in tanks that already had a pressure tank in them before. Low water pressure can cause water to work continuously.2. When range adjustment is satisfactory, replace the rubber plug.
Sensor Picking Up Opposite Wall Or Surface, Or Only Flushes.
How do you adjust a sloan flushmate? How to replace sloan g2 batteries i. Refer to standard toilet tank troubleshooting if you have a standard toilet tank.
Check The Adjustment Of The Actuator.
Adjust the range potentiometer screw located on top of the sensor module a few degrees clockwise to increase the range or a few degrees counterclockwise to decrease the range. To make this adjustment, hold the actuator while loosening the phillips setscrew in the center of the actuator, and rotate the actuator up (counterclockwise) or down (clockwise) until the proper clearance is obtained. An innovative flushometer designed to meet the needs of the global market.
Post a Comment for "Sloan Flushmate Sensor Adjustment"