Dt466 Cam Sensor Issues
Dt466 Cam Sensor Issues. I know this isn't the right section but i figured i'd try it, i'm currently working on a dt466e in a 2003 4300 international and it has a miss/surging issue at 2000 rpm to 2300 rpm, but only when it's over 200 degrees and under heavy throttle, like climbing a hill. All of these are symptoms that your 7.3’s cam sensor is about to fail.
This isn’t so much any mechanical issue or actual problem with the 1995+ dt466e engines. If it stays running replace the sensor. Diagrams wiring international dt466 oil pressure sensor.
2003 International 4300 7.6L (Dt466) Fault Code 143 Sid 21 Fmi 2.
Btw when a cam sensor hiccups and shuts down the engine, you won't get a light, but a code will set. Sid 21 fmi 2, injection control. Crank no start when hot.
2005 Dt466 Minor Problems Diesel Truck Forum.
If the engine oil pressure is poor the injection system suffers. To see if the icp sensor is bad unplug it and run the engine. International 4300 icp sensor for dt466 engines with.
If It Stays Running Replace The Sensor.
It will turn on the engine light but don't worry about that. Im not looking at the manual but this guy says its supposed to be between.025 and.030 inches. International icp sensor dt466 location pdfsdocuments2 com.
Wiring Diagrams Dt466 Oil Pressure Sensor Location.
Dt466 2002 just shuts down. All of these are symptoms that your 7.3’s cam sensor is about to fail. We have also changed the camshaft position sensor and inspected wiring and connections in the area of the starter.
Dt 466 Cam Sensor Replacement School Bus Fleet.
Reference service manual eged2652 for front cover removal. If you changed a camshaft, make sure your cam end play is correct for proper sensor spacing. Over time, the camshaft position sensor can fail, or become worn down, due to accidents or normal wear and tear.
Post a Comment for "Dt466 Cam Sensor Issues"