Wireless Brake Temperature Sensor
Wireless Brake Temperature Sensor. Based wireless sensor network with good performance that is comparable to paramer observed. From the test results he had done showed that all systems can work well with a 100% success percentage dht11.
Featuring a 915mhz transmission power, it delivers consistent updates and is crafted with a transmission range of 330 feet. Mounted in the brake pad, one sensor for the front axle and one sensor for the rear can be installed to determine and indicate when the driver needs to perform a replacement. ±1.5 %rh for humidity range 0 to 90 %rh and temperature range +10°c to +60°c.
In A Study [4], Entitled Implementation And Analysis Of Wireless Sensor Network For Monitoring Temperature,
From the test results he had done showed that all systems can work well with a 100% success percentage dht11. The brake pad wear sensor accurately informs the driver about the current wear of the vehicle's brake pad. The sensor generates a signal, detectable by a detector, for confirming the presence of the sensor.
Mounted In The Brake Pad, One Sensor For The Front Axle And One Sensor For The Rear Can Be Installed To Determine And Indicate When The Driver Needs To Perform A Replacement.
Contact patch load variation, wheel temperature, humidity. The battery can be replaced by removing only the wireless communication module without dismounting the measurement module from the pipe mounting. Use our free blutag app or blunfc windows software.
Measuring Specific Part Of Brake:
Fully configurable, 8 temperature channels / tire with a refresh rate of up to 50hz. Its housing is manufactured from stainless steel, boasts a welded connector and is hermetically sealed. Battery lifecycle is 2 years with ip66 enclosure.
Capable Of Providing A Date, Time, Temperature, Humidity And Geolocation Stamp In Google Maps When Scanned.
±0.1 °c , for temperature range +20°c to +60°c. However, the main issues of this monitoring apparatus were represented by the presence of wired sensors and by. For temperature profiling, it is best to position the sensor 10cm away and point it at the desired spot.
In , The Temperature Of Brake Blocks And The Pressure Variations Was Measured In Some Key Points Of The Braking Plant, And The Significance Of The Collected Data And The Efficiency Of The Developed Monitoring Systems Was Demonstrated.
±1.5 %rh for humidity range 0 to 90 %rh and temperature range +10°c to +60°c. Based wireless sensor network with good performance that is comparable to paramer observed. It is less than 4mm thick, so it fits in wafer processing ovens and other critical fab equipment.
Post a Comment for "Wireless Brake Temperature Sensor"