Sundance Spa Temperature Sensor Location
Sundance Spa Temperature Sensor Location. They are designed to be installed in the heater assembly in a drywell location. Add to cart details > sensor:
The hi limit sensor can be tested like the temp sensor. Contact the dealer or a service technician. The temp sensors are located in the filter compartment on the side.
The Temp Sensors Are Located In The Filter Compartment On The Side.
They are unscrewed from the inside of the tub and the wire is fed through the tub into the equipment compartment. Used for the following models: The only video out there of a temperature sensor being swapped out on a jacuzzi j 480!my hot tub was hitting the high limit and i just couldn’t get it to coo.
However, Because Heat Retentive Materials Are Utilized To Insulate The Spa For Efficient Operation, An Uncovered Spa Surface And Wall Fittings Directly Exposed To Sunlight And High Temperatures For An Extended Period
Follow the wire to the pc board. Sundance® spas hi limit sensors. Stands for “sensor 3” and displays when the main water temperature sensor is shorted or disabled.
Indicates A Shorted Sensor And Spa Is Shut Down Or An Open Sensor And Heater Is Disabled.
They are unscrewed from the inside of the tub and the wire is fed through a tube into the equipment compartment. When reading such as oh or incorrect temperature read outs are showing up, the sensors are probably defective. This part fits multiple models and.
The Hi Limit Sensor Can Be Tested Like The Temp Sensor.
Add to cart details > temp sensor: My temperature probe gun showed the sensor button to be 63 degrees (close enough). Check out our diagnostic guide on this page.
They Are Designed To Be Installed In The Heater Assembly In A Drywell Location.
Follow the wire to the pc board. This will depress the pin tine,allowing the wire to be pulled from the. Location spa works supply 2514 e.
Post a Comment for "Sundance Spa Temperature Sensor Location"